A morning shower without hot water may be your greatest nightmare. Losing your cold water at your Egg Elizabeth NJ, house, on the other hand, might be just as awful. When you arrange plumbing repair immediately, it's a reasonably straightforward issue.
Your main water valve is closed.Examine your other showers and faucets to determine the extent of the problem. If your faucets aren't getting cold water, the main water supply shutdown valve is most likely switched off. All you have to do is restart it.
Your pressure-balancing valve must be replaced.If your other showers and faucets all have cold water, the pressure-balancing valve is most likely to blame. This valve is often located inside the shower's faucet.
The purpose of this valve is to control water pressure and balance the flow of hot and cold water as it leaves the showerhead. This issue is readily resolved by replacing the faulty valve.
Mineral buildup or corrosion in your showerShowers that are not used regularly are more prone to accumulate mineral deposits. Corrosion builds up in the cartridge that keeps the pressure-balancing valve in place. This accumulation might cause the pressure-balancing valve to fail, particularly if you have hard water.
If the collection grows too large, it may prevent cold water from reaching the showerhead. If this occurs, you'll need to change the cartridge. Changing the pressure-balancing valve or cartridge is a simple and affordable plumbing repair. These will restore the balance of hot and cold water in your shower.
Elizabeth Drain Servicer's multi-talented plumbing technicians provide various plumbing services. To learn more, please get in touch with us online or by phone.