How to Replace a Toilet Seat
Installing or changing a toilet seat is a simple task. relatively simple task. All you'll need are some essential tools to replace your toilet seat, whether it's old, damaged, or you want a new style.
Installing a toilet seat is frequently one of the simplest and quickest DIY projects in your bathroom and can be completed in minutes.
Please continue reading our comprehensive guide that outlines each stage of the procedure...
Why should I get a new toilet seat?Toilet seats may be changed for numerous reasons. Issues might include the heart being damaged or cracked, the missing fixings causing it to wobble and move around while sitting, or you desire a different design.
If you have a new bathroom, the seat will most likely be installed for you, but if not, there is another incentive to install a toilet seat.
Do all toilet seats have the exact dimensions?
No, not all toilet seats are the same size. Since toilets come in a variety of forms, so check yours before purchasing.
There are three varieties of toilet forms usually seen in NJ houses. There are circular, D-shaped, and square chairs available. A soft shut seat is another popular feature, so if this is your desire, measure accurately to ensure this sort of seat will suit your toilet.
Replacement toilet seats may usually be altered to suit older or non-standard toilets; however, the heart contact points or hinges must be supported.
"electronic commerce" refers to selling goods and services through the internet. Hence, it is crucial to remember this while seeking a replacement at a store or from the original manufacturer.
When you purchase a seat, there is anything you must do first...
You don't want to purchase a toilet seat that doesn't fit.
Is there a standard toilet seat size?
Because of the diversity of toilet types, there is no standard size for all toilet seats. To choose the ideal toilet seat for your toilet, you must first measure it. See below for instructions.
Even though most seats are customizable to accommodate the most common toilet bowl forms, you will need specific critical dimensions. The dimensions are as follows:
With these dimensions, you may get a suitable size toilet seat.
Do I need to take any precautions before replacing my toilet seat?
Toilets are an apparent site for developing hazardous bacteria and may be a source of possible diseases. Hence, it would help if you took measures before beginning.
While replacing a toilet seat, always use rubber cleaning gloves. Clean it ideally before removing it. When you've removed the toilet seat, thoroughly clean the whole toilet. Employ an anti-bacterial spray, which is available at most stores.
Employ an anti-bacterial handwash after you've completed replacing your toilet seat to be sure you've eradicated any hazardous germs.
What equipment will I need to replace a toilet seat?
You'll need a pair of pliers or an adjustable wrench to remove the nuts that attach the seat to the toilet. These are usually wingnuts.
You may also need a flathead screwdriver to remove any plastic covers that cover the nuts. Most of these tools may be found in a garden shed or bought cheaply at most retailers.
Depending on the seat, it may come with an attachment kit. You will likely have to purchase the components if you change the fittings, such as nuts, and not the whole seat.
Specific contemporary toilets may not come with typical screw-on seats but a slot-in design, so confirming this before purchasing a replacement is advisable.
How to Recycle an Old Toilet Seat
The majority of toilet chairs are fitted to the toilet. They are held together by two bolts commonly disguised by plastic coverings at the rear of the seat.
You may need to stoop or get on the floor to reach them.
Remove any plastic covers that are covering the nuts with your flathead screwdriver. This may be more challenging for older chairs sitting in for some time. To gently remove the caps, work your way around, taking caution, cautioning the toilet itself.
After removing the caps, you'll see the tops of the screws with wingnuts that keep your seat in place. These nuts are often made of plastic, although depending on the age of the heart, they may be made of metal. Loosen the nuts with your pliers, and then remove them by hand.
The seat should then lift out, although depending on the manufacturer, you may have to unscrew it with a screwdriver. If it is stiff or too rusty to take away on its own, spray some WD-40 to lubricate it and wait up to 10 minutes before moving the seat out.
If they remain attached, you may need a tiny hacksaw to cut them off carefully.
Some toilet seats are kept in place differently than others, but most operate similarly. If your heart is different, check the fittings, and you should be able to figure it out.
That might be difficult and unpleasant, but it should take a little time. Just remember the procedure for the next time.
As previously said, thoroughly clean the whole toilet with an anti-bacterial spray after removing your old toilet seat.
How to fit a new toilet seatAfter removing the old seat, it's time to install the new one. Fittings will be included with the new center, as will instructions from the manufacturer on installing them.
Fitting a new toilet seat is the opposite of removing one.
To begin, align and secure the new fittings by inserting the bolts into the toilet fixing holes. Ensure your seat is centered and rests properly on the border of your toilet bowl. If you're satisfied with the location of the heart, tighten the wingnuts with your hands or pliers.
Avoid overtightening them since you may need to modify them after installing the new toilet seat. Also, if plastic bolts are used, they will only need minor damage before giving way or snapping.
Rubber washers may also be cushioned between the nut and the toilet.
You will do this on both sides of the seat since there will be two bolts to tighten in total.
If the new toilet seat comes with plastic caps, snap them into place by pressing them down on the bolts and wingnuts.
Leave a Reply.